公司新聞
information- 磁場電磁鐵仿真計算步驟 2024-02-24
磁場電磁鐵仿真計算步驟:第一建立模型,按照產品實物創建1:1的二維或三維模型;第二、設置產品模型的材料屬性,每一個組件配件都要指定材料性質;第三、設置邊界條件和工作激勵條件;第四、進行仿真計算;第五、檢查結果;第六、不滿意就修改模型和條件,繼續仿真,直到結果滿意為止。...
- 磁場電磁鐵水冷設計重點 2024-02-18
磁場電磁鐵水冷設計重點:水冷分為兩種,內冷和外冷式;內冷式重點是考慮水的流速和出水量、溫度等;外冷式重點是散熱片箱與勵磁線包的接觸面積、流速等。...
- 電磁鐵設計的最大極面有沒有限制 2024-02-03
電磁鐵設計的最大極面有沒有限制?我們感覺從實踐中應該沒有限制,因?yàn)樵硭惴ㄒ粯?但是、如果我們采用某種仿真和程序軟件進行設計,我們認為肯定有限制的、因?yàn)檫吔鐥l件是存在的,具體情況如何,我們需要實踐檢驗。...
- 磁場電磁鐵設計中的鈷合金軟磁 2024-01-26
鐵鈷軟磁合金通??梢杂米鞔艌鲭姶盆F的極頭材料,是含鈷50%左右的鐵鈷合金系軟磁材料,為改善加工性能,通常加入1.4~1.8%的釩(V),故又稱為鐵鈷釩軟磁合金。它具有極高的飽和磁通密度Bs(2.4T)和居里溫度(980~1100℃),因而適合于制作要求重量輕、體積小、工作溫度高的航空電器(微特電機、...
- 大型磁場電磁鐵2T磁場設計難點 2024-01-20
大型磁場電磁鐵2T磁場設計難點?大型磁場電磁鐵由于體積大、重量重。本身就給設計制造帶來困難,大件的機械加工、勵磁線包的繞制、都增加了難度,另外大型的設計參考資料很少,實際經驗總結的不多,這就給設計者產生很大的壓力;第三就是調試的難度,因?yàn)榇笮碗姶盆F都是大功率設備,產品調試一定要有大負荷的電力供應...